材料力學（原書第六版）

Chapter 1
Stress
應力
1.1 Introduction
引言
1.2 Equilibrium of a Deformable Body
變形體的平衡
1.3 Stress
應力
1.4 Average Normal Stress in all Axially Loaded Bar
軸向加載桿的平均正應力
1.5 Average Shear Stress
平均剪應力
1.6Allowable Strss
容許應力
Chapter 2
Strain
應變
2.1 Deformation
變形
2.2 Strain
應變
Chapter 3
Mechanical Properties of Materials
材料的力學性質
3.1 The Tension and Compression Test
拉伸和壓縮試驗
3.2 The Stress—Strain Diagram
應力一應變圖
3.3 Stress—Strain Behavior of Ductile and Brittle Materials
塑性和脆性材料的應力一應變特性
3.4 Hooke’s Law
虎克定律
3.5 Strain Energy
應變能
3.6 Poisson’s Ratio
泊松比
3.7 The Shear Stress—Strain Diagram
剪切應力一應變圖
Chapter 4
Axial Load
軸向荷載
4.1 Saint—Venant’s Principle
圣文南原理
4.2 Elastic Deformation of an Axially Loaded Member
軸向加載桿件的彈性變形
4.3 Principle of Superposition
疊加原理
4.4 Statically Indeterminate Axially Loaded Member
靜不定軸向加載桿件
4.5 The Force Method of Analysis for Axially Loaded Members
分析軸向加載桿件的力法
4.6 Thermal Stress
熱應力
4.7 Stress Concentrations
應力集中
Chaoter 5
Torsion
扭轉
5.1 Torsional Deformation of a Circular Shaft
圓軸的扭轉變形
5.2 The Torsion Formula
扭轉公式
5.3 Power Transmission
功率傳遞
5.4 Angle of Twist
扭轉角
5.5 Statically Indeterminate Torque-Loaded Members
靜不定受扭桿件
5.6*Solid Noncircular Shafts
實非圓截面軸
Chapter 6
Bending
彎曲
6.1 Shear and Moment Diagrams
剪力和彎矩圖
6.2 Graphical Method for Constructing Shear and Moment Diagrams
繪制剪力和彎矩圖的圖解法
6.3 Bending Deformation of a Straight Member
直桿的彎曲變形
6.4 The Rexure Formula
彎曲公式
6.5 Unsymmetric Bending
非對稱彎曲
Chapter 7
Trallsverse Shear
橫向剪力
7.1 Shear in Straight Members
直桿中的剪力
7.2 The Shear Formula
剪切公式
7.3 Shear Stresses in Bearns
梁中的剪應力
7.4 Shear Flow in Built-up Members
組裝桿件中的剪力流
7.5 Shear Flow in Thin-Walled Members
薄壁桿件中的剪力流
7.6*Shear Center
剪切中心
Chapter 8
Combined Loadings
組合荷載
8.1 Thin-Wailed Pressure Vessels
薄壁壓力容器
8.2 State of Stress Caused by Combined Loadings
組合荷載引起的應力狀態
Chapter 9
Stress Transformation
應力轉換
9.I Plane-Stress Transfotination
平面應力轉換
9.2 General Equations of Plane-Stress Transformation
平面應力轉換的一般公式
9.3 Principal Stresses and Maximum In—Plane Shear Stress
主應力和平面內最大剪應力
9.4 Mohr’s Circle--Plane Stress
莫爾圓一平面應力
9.5 Stress in Shafts Due to Axial Load and Torsion
軸向荷載和扭矩引起的軸中應力
9.6 Stress Variations Throughout a Prismatic Beam
等截面梁內應力變化
9.7 Absolute Maximum Shear Stress
所有方向上最大剪應力
Chapter 10
Strain Transformation
應變轉換
10.1 Plane Strain
平面應變
10.2 General Equations of Plane-Strain Transformation
平面應變轉換的一般公式
10.3 Strain Rosettes
應變花
10.4 Material—Property Relationships
材料性質關系
10.5*Theories of Failure
失效理論
Chapter 11
Design of Beams and Shafts
梁和軸的設計
11.1 Basis for Beam Design
梁設計基礎
11.2 Prismatic Beam Design
等截面梁設計
11.3*Fully Stressed Beams
滿應力梁
11.4*Shaft Design
軸設計
Chapter 12
Deftections of Beams and Shafts
梁和軸的撓度
12.1 The Elastic Curve
彈性曲線
12.2 Slope and Displacement by Integration
積分求斜率和位移
12.3 Method of Superposition
疊加法
12.4 Statically Indeterminate Beams and Shafts
靜不定梁和軸
12.5 Statically Indeterminate Beams and Shafts—Method of Integration
靜不定梁和軸一積分法
12.6 Statically Indeterminate Beams and Shafts--Method of Superposition
靜不定梁和軸一疊加法
Chapter 13
Buckling of Columns
柱的屈曲
13.1 Critical Load
臨界荷載
13.2 Ideal Column with Pin Supports
兩端鉸支的理想柱
13.3 Columns Having Various Types of Supports
有各種支承的柱
13.4*T11e Secant Formula
正割公式
13.5*Inelastic Buckling
非彈性屈曲
Chapter 14
Energy Methods
能量法
14.1 External Work and Strain Energy
外力功和應變能
14.2 Elastic Strain Energy for Various Types of Loading
各種荷載下的彈性應變能
14.3 Conservation of Energy
能量守恒
14.4 Impact Loading
沖擊荷載
14.5*Castigliano’s Theorem
卡氏定理
14.6*Castigliano’s Theorem Applied to Trusses
卡氏定理在桁架上的應用
14.7*Castigliano’s Theorem Applied to Beams
卡氏定理在梁上的應用
Appendix A
Geometric Properties of an Area
面積的幾何性質
A.1 Centroid of an Area
面積的形心
A.2 Moment of Inertia for an Area
面積的慣性矩
A.3 Product of Inertia for an Area
面積的慣性積
A.4 Moments of Inertia for an Area about Inclined Axes
面積對斜軸的慣性矩
Appendix B
Geometric Properties of Structural Shapes
結構型鋼的幾何性質
Appendix C
SIopes and Dellections of Beams
梁的轉角和托度
Answers
參考答案
Glossary
術語表