Freeform Optics for LED Package

定　價：￥298.00

作　者：	王愷，劉勝著，羅小兵，吳丹編
出版社：	化學工業出版社
叢編項：	先進電子封裝技術與關鍵材料叢書
標　簽：	暫缺

購買這本書可以去

ISBN：	9787122334978	出版時間：	2020-04-01	包裝：	精裝
開本：	16開	頁數：	355	字數：

內容簡介

　　自由曲面光學是一新興的LED照明光學技術，其優勢在于具有較高的設計自由度和精確的光能量分布控制，能夠提供一個實現高品質LED照明的有效的光學設計方法。本書系統地介紹了一系列面向LED封裝與應用的自由曲面光學算法與設計方法，包括各類圓對稱自由曲面透鏡、非圓對稱自由曲面透鏡、自由曲面透鏡陣列優化等。同時，也包括了LED照明中各種先進的自由曲面光學設計應用與案例分析，包括光型可控的應用導向型LED封裝、LED室內照明、LED道路照明、LED直下式背光、LED汽車前大燈、LED微投影儀、高空間顏色均勻度自由曲面透鏡等。并且，在附錄中提供基本的自由曲面光學算法計算代碼供讀者參閱。本書中所介紹的大部分LED自由曲面光學算法和設計都得到了工業界的驗證，在具有學術價值外，同時也具有較高實用指導價值。通過本書，讀者將對各種LED封裝與應用中的自由曲面光學技術有一個全面而深入的理解。同時，讀者還可以系統地學習到詳細的自由曲面光學算法與設計方法，便于提高獨自開發先進LED照明光學設計的能力。本書有利于加快LED封裝與應用的研發速度。此外，通過開放的算法代碼與案例分析，讀者將能夠更快更高效地掌握LED照明自由曲面光學的設計方法。本書可供從事LED照明的研究人員、工程師、高校的研究生以及高年級的本科生參考。

作者簡介

　　王愷，廣東昭信光電科技有限公司，副總經理，工程師，王愷，2011年畢業于華中科技大學&武漢光電國家實驗室，獲工學博士學位，主要從事大功率LED先進封裝與應用技術研究，包括基于自由曲面光學的應導向型封裝ASLP、晶圓級封裝WLP、系統集成封裝SiP等。所研發的新型自由曲面光學算法以及應用導向型LED封裝為高品質LED照明提供了一套有效的光學解決方案，在LED封裝、背光、汽車前大燈、道路照明等領域得到成功應用，引起國際相關研究機構的關注（如Philips歐洲研究院、韓國LIFTRC研究中心等）。2009至2011年兼任廣東昭信光電科技有限公司研發主管一職。2011年至今擔任廣東昭信光電科技有限公司副總經理，負責新型LED封裝及特種照明應用產品的研發工作，包括高光效大功率LED（>150 lm/W）、高亮度車燈專用LED模組、低成本熒光粉保形涂覆技術、LED標準光組件等，具有將研究成果成功轉化為產品并盈利的產業經驗。

圖書目錄

Preface xi

1 Introduction 1
1.1 Overview of LED Lighting 1
1.2 Development Trends of LED Packaging and Applications 5
1.3 Three Key Issues of Optical Design of LED Lighting 7
1.3.1 System Luminous Efficiency 7
1.3.2 Controllable Light Pattern 7
1.3.3 Spatial Color Uniformity 8
1.4 Introduction of Freeform Optics 10
References 12

2 Review of Main Algorithms of Freeform Optics for LED Lighting 15
2.1 Introduction 15
2.2 Tailored Design Method 16
2.3 SMS Design Method 17
2.4 Light Energy Mapping Design Method 18
2.5 Generalized Functional Design Method 19
2.6 Design Method for Uniform Illumination with Multiple Sources 22
References 22

3 Basic Algorithms of Freeform Optics for LED Lighting 25
3.1 Introduction 25
3.2 Circularly Symmetrical Freeform Lens–Point Source 25
3.2.1 Freeform Lens for Large Emitting Angles 26
3.2.1.1 Step 1. Establish a Light Energy Mapping Relationship between the Light Source and Target 27
3.2.1.2 Step 2. Construct a Freeform Lens 31
3.2.1.3 Step 3. Validation and Optimization 33
3.2.2 TIR-Freeform Lens for Small Emitting Angle 33
3.2.3 Circularly Symmetrical Double Surfaces Freeform Lens 39
3.3 Circularly Symmetrical Freeform Lens – Extended Source 42
3.3.1 Step 1. Construction of a Point Source Freeform Lens 45
3.3.2 Step 2. Calculation of Feedback Optimization Ratios 45
3.3.3 Step 3. Grids Redivision of the Target Plane and Light Source 46
3.3.4 Step 4. Rebuild the Energy Relationship between the Light Source and Target Plane 46
3.3.5 Step 5. Construction of a Freeform Lens for an Extended Source 47
3.3.6 Step 6. Ray-Tracing Simulation and Feedback Reversing Optimization 47
3.4 Noncircularly Symmetrical Freeform Lens–Point Source 48
3.4.1 Discontinuous Freeform Lens Algorithm 49
3.4.1.1 Step 1. Establishment of a Light Energy Mapping Relationship 49
3.4.1.2 Step 2. Construction of the Lens 52
3.4.1.3 Step 3. Validation of Lens Design 55
3.4.2 Continuous Freeform Lens Algorithm 55
3.4.2.1 Radiate Grid Light Energy Mapping 57
3.4.2.2 Rectangular Grid Light Energy Mapping 58
3.5 Noncircularly Symmetrical Freeform Lens–Extended Source 60
3.5.1 Step 1. Establishment of the Light Energy Mapping Relationship 61
3.5.2 Step 2. Construction of a Freeform Lens 61
3.5.3 Step 3. Validation of Lens Design 62
3.6 Reversing the Design Method for Uniform Illumination of LED Arrays 63
3.6.1 Reversing the Design Method of LIDC for Uniform Illumination 64
3.6.2 Algorithm of a Freeform Lens for the Required LIDC 66
References 68

4 Application-Specific LED Package Integrated with a Freeform Lens 71
4.1 Application-Specific LED Package (ASLP) Design Concept 71
4.2 ASLP Single Module 72
4.2.1 Design Method of a Compact Freeform Lens 72
4.2.2 Design of the ASLP Module 73
4.2.2.1 Optical Modeling 73
4.2.2.2 Design of a Compact Freeform Lens 73
4.2.2.3 ASLP Module 74
4.2.3 Numerical Analyses and Tolerance Analyses 76
4.2.3.1 Numerical Simulation and Analyses 76
4.2.3.2 Tolerance Analyses 77
4.2.3.3 Experiments 81
4.3 ASLP Array Module 85
4.4 ASLP System Integrated with Multiple Functions 87
4.4.1 Optical Design 89
4.4.1.1 Problem Statement 89
4.4.1.2 Optical Modeling 89
4.4.1.3 Design of a Freeform Lens 90
4.4.1.4 Simulation of Lighting Performance 91
4.4.2 Thermal Management 91
4.4.3 ASLP Module 94
References 96

5 Freeform Optics for LED Indoor Lighting 99
5.1 Introduction 99
5.2 A Large-Emitting-Angle Freeform Lens with a Small LED Source 99
5.2.1 A Freeform Lens for a Philip Lumileds K2 LED 100
5.2.2 Freeform Lens for a CREE XLamp XR-E LED 103
5.3 A Large-Emitting-Angle Freeform Lens with an Extended Source 108
5.3.1 Target Plane Grids Optimization 108
5.3.2 Light Source Grids Optimization 108
5.3.3 Target Plane and Light Source Grids Coupling Optimization 109
5.4 A Small-Emitting-Angle Freeform Lens with a Small LED Source 110
5.5 A Double-Surface Freeform Lens for Uniform Illumination 113
5.5.1 Design Example 1 114
5.5.2 Design Example 2 115
5.5.3 Design Example 3 116
5.6 A Freeform Lens for Uniform Illumination of an LED High Bay Lamp Array 117
5.6.1 Design Concept 117
5.6.2 Design Case 118
5.6.2.1 Algorithms and Design Procedure 118
5.6.2.2 Optical Structures 119
5.6.2.3 Monte Carlo Optical Simulation 121
References 124

6 Freeform Optics for LED Road Lighting 125
6.1 Introduction 125
6.2 The Optical Design Concept of LED Road Lighting 126
6.2.1 Illuminance 127
6.2.2 Luminance 128
6.2.3 Glare RestrictionThreshold Increment 129
6.2.4 Surrounding Ratio 130
6.3 Discontinuous Freeform Lenses (DFLs) for LED Road Lighting 131
6.3.1 Design of DFLs for Rectangular Radiation Patterns 131
6.3.1.1 Step 1. Optical Modeling for an LED 131
6.3.1.2 Step 2. Freeform Lens Design 133
6.3.2 Simulation Illumination Performance and Tolerance Analyses 134
6.3.3 Experimental Analyses 139
6.3.4 Effects of Manufacturing Defects on the Lighting Performance 139
6.3.4.1 Surface Morphology 144
6.3.4.2 Optical Performance Testing 146
6.3.4.3 Analysis and Discussion 150
6.3.5 Case Study–LED Road Lamps Based on DFLs 152
6.4 Continuous Freeform Lens (CFL) for LED Road Lighting 154
6.4.1 CFL Based on the Radiate Grid MappingMethod 154
6.4.2 CFL Based on the Rectangular Grid MappingMethod 154
6.4.3 Spatial Color Uniformity Analyses of a Continuous Freeform Lens 158
6.5 Freeform Lens for an LED Road Lamp with Uniform Luminance 164
6.5.1 Problem Statement 164
6.5.2 Combined Design Method for Uniform Luminance in Road Lighting 166
6.5.3 Freeform Lens Design Method for Uniform-Luminance Road Lighting 171
6.6 Asymmetrical CFLs with a High Light Energy Utilization Ratio 174
6.7 Modularized LED Road Lamp Based on Freeform Optics 178
References 178